Canon ImageRunner 5020 Series, Справочное руководство справочное руководство, Страница: 317 / 524

Setting MEAP Settings (MEAP Settings)
4-93
4
System Manager Settings
Setting MEAP Settings
(MEAP Settings)
You can specify the settings if the HTTP is required for MEAP functions and MEAP
applications. You can also print the information of the MEAP applications.
Setting Use HTTP Server (Use HTTP)
Set the Use HTTP to ‘On’ to access this machine from a Web browser and use
MEAP applications.
NOTE
•
The default setting is ‘On’.
•
Set the Use HTTP to ‘On’ if the HTTP is required for MEAP functions and MEAP
applications. To use HTTP for other than MEAP functions (e.g., Remote UI), set the Use
HTTP in Network Settings to ‘On’. (See Chapter 3, “Using a TCP/IP Network,” in the
Network Guide .)
•
If you set the Use HTTP in System Settings (from the Additional Functions screen) to
‘On’, the port number for the MEAP functions and MEAP applications is automatically set
to ‘8000’.
1
Press (Additional Functions)
➞
[System Settings].
If the System Manager ID and Password have already been set, enter the System
Manager ID and System Password using
- (numeric keys)
➞
press (ID).
2
Press [
▼
] or [
▲
] until [MEAP Settings] appears
➞
press
[MEAP Settings].
0 9
ID