Canon ImageRunner 5000 Series, Руководство пользователя

Страница: 328 / 523

Setting Specifications that are Common to Each Function (Common Settings) 6-7
6
Setting and Adjusting Common Settings to Suit
Y
our
Needs
3
Press the [Done] key.
Repeat this until the Basic Features screen appears again.
Selecting the Default Display After Auto Clear
Gives you the choice of whether or not to display the screen set by this function after Auto Clear has
taken place.
NOTE
• The time delay for Auto Clear can be set. (See “Setting the Time Taken for Display to Return to Basic
Screen after Finishing Operations,” on p. 6-27.)
• The default setting is “Initial Function”.
1
Call up the desired screen as follows:
2
Select the [Initial Function] or [Selected Func-
tion] key, and press the [OK] key.
●
When you select the [Initial Function] key:
The screen set under Initial Function is dis-
played after Auto Clear has taken place. For
example, if Copy is set under Initial Function
and Auto Clear takes place after setting the Mail
Box function, the display returns to the Copy
Basic Features screen.
●
When you select the [Selected Function] key:
The display returns to the screen that was dis-
played before Auto Clear takes place. For
example, even if Copy is set under Initial Func-
tion and Auto Clear takes place after setting the
Mail Box function, the display returns to the Mail
Box selection screen.
3
Press the [Done] key.
Repeat this until the Basic Features screen appears again.
Auto Clear Setting key
Additional Functions
E82_US.book Page 7 Tuesday, May 22, 2001 12:11 AM