Canon ImageRunner 4051, Основное руководство по эксплуатации

Страница: 81 / 180

81
Routine
■M
ain
tenanc
e
5
Close the front cover of the finisher .
When you have replaced the staple case, be sure to manually reposition the staples in the saddle stitcher
unit. (See e-Manual > Settings/Registration.)
Replacing the Staple Cartridge (Inner Finisher-D1)
This section describes the procedure for replacing the staple cartridge in the Inner Finisher-D1.
1
Pull out the staple case from the finisher .
2
1
1.■ Open■the■front■cover■of■the■
finisher.
2.■ Lift■and■pull■out■the■staple■
case■from■the■stapler■unit,■
holding■it■by■the■green■tab.
2
Pull out the empty staple cartridge from the staple case .
PUSH
2
1
1
1.■ Press■the■areas■indicated■by■
PUSH■on■both■sides■of■the■
staple■case.
2.■ Once■you■have■released■the■
spring-loaded■case,■pull■out■
the■staple■cartridge.
When closing the front cover of the finisher, be careful not to get your fingers caught, as this
may result in personal injury .