Canon ImageRunner 4051, Основное руководство по эксплуатации

Страница: 70 / 180

70
Loading Envelopes
This section explains how to load envelopes into Paper Drawer 2.
1
Open the drawer .
1
2
1.■ Press■and■release■the■button■
on■Paper■Drawer■2.
2.■ Grip■the■handle,■and■pull■
out■the■paper■drawer■until■it■
stops.
2
Load the envelopes into the drawer .
2
1
1.■ Load■10■envelopes■at■a■time■
with■the■side■you■want■to■
print■on■facing■up.■While■
loading■the■envelopes,■press■
down■on■the■left■side■of■the■
receptacle■to■lock■them■into■
place.
2.■ Align■the■leading■edges■of■
the■envelopes,■and■make■
sure■that■they■are■held■in■
place■under■the■claws.
3
Load the envelopes as shown below .
Front
• Envelopes which have been rolled or curled must be straightened out prior to use.
• Make sure that the height of the envelope stack does not exceed the height limit mark ( ).
• The maximum height (quantity) of envelopes that can be loaded into the cassette is approximately 1 1/4”
(30 mm).
• The maximum height (quantity) of envelopes varies, depending on the envelope type and user operating
conditions, but as a reference, 1 1/4” (30 mm) is approximately 50 envelopes.