Canon ImageRunner 4025 Скачать руководство пользователя страница 133

Страница: 133 / 180

133

Troubleshooting

Gently push the staple case back into the finisher and push down firmly until it

is securely in place .

Close the front cover of the finisher .

After the cover is closed, the stapler unit may automatically perform a “dry” stapling operation to reposition

the staples.

Saddle Stitcher Unit of the Booklet Finisher-G1

Check the location of the staple jam, and follow the procedure described below, while referring to the directions that

appear on the touch panel display, to remove the jammed staple.

• Make sure to close all covers and paper drawers of the machine before clearing any staple jams.

• Before clearing a staple jam in the saddle stitcher unit, remove all paper that has been output to the booklet tray.

The Booklet Finisher-G1 is an optional product.

Open the front cover of the finisher .

When closing the cover, be careful not to get your fingers caught, as this may result in personal

injury .

Содержание ImageRunner 4025





















































































































































































Результаты поиска

Содержание ImageRunner 4025

Отзывы:

Canon ImageRunner 4025, Основное руководство по эксплуатации, Страница: 133 / 180

Результаты поиска

Содержание ImageRunner 4025

Отзывы: