Canon imageRUNNER 2545i, Руководство по отправке факсов

Страница: 77 / 321

Advanced Sending Methods 2-50
Se
ndin
g
Docume
nt
s
2
Calling from an Extension
When calling an outside line from an extension, the outside line access number
(such as 0) is normally dialed before the destination fax number. Likewise, when the
machine is connected to an extension, the outside line access number needs to be
entered before fax numbers. You can also enter a pause time (i.e., the amount of
time the machine waits after dialing the outside line access number when calling
from an extension) together with these numbers.
1
Pre ss ( S END)
➞
place your ori g inal s .
NOTE
For instructions on how to place your originals, see Chapter 2, “Basic Operations,” in
the
Reference Guide .
2
Pre ss [New Addre ss ]
➞
[Fax].
NOTE
If Fax Send is set to ‘Do not allow’,
[Fax] is not displayed. (See Chapter 4,
“Customizing Settings,” in the
Remote
UI Guide .)
3
Pre ss [R].
If you have not registered the outside line
access number in the R-key, [R] is not
available. Use
- (numeric keys) to
enter the outside line access number.
NOTE
For instructions on how to register the
outside access number in the R-key,
see Chapter 4, “Setting the Send
Function,” in the
System Settings
Guide .