Canon imageRUNNER 2545i, Руководство для клиента

Страница: 15 / 130

Logging in to the Machine EN-8
Engl
ish
Logging in to the Machine
This section describes the operation procedures for the log-in methods provided by
the uniFLOW integration.
NOTE
When the optional MiCard Reader is attached to the machine, you can log in and log
out by holding your ID card over the MiCard Reader, regardless of the applied log-in
method (except when the department ID and password is applied as the log-in
method).
Entering a User Name and Password
Enter your user name and password to log in when the screen shown in step 1 is
displayed.
NOTE
To log in to the machine, you must have a valid user name and password (if set)
registered. For instructions on how to register a user name and password in the
uniFLOW server, see the documentation included with the uniFLOW software.
1
Enter your user name and
password (up to 32 characters
respectively) using the on-screen
keyboard and
- (numeric
keys).
❑
Press [User]
➞
enter your user name
➞
press [OK].
❑
Press [Password]
➞
enter the password
➞
press [OK].
The characters that you enter for the
password are displayed as asterisks
(********).
❑
Press [Log In].
You can also press (Log In/Out) to
log in.