Canon imageRUNNER 2535, Руководство по обслуживанию, Страница: 75 / 362

2
2
2-49
2-49
Technology > Fixing System > Controls > Down sequence control
Technology > Fixing System > Controls > Down sequence control
Related Service Mode
Offset of fixing control temperature (High and low of control temperature)
PRINT > SW
> 62 (Control temperature during cassette feeding)
> 63 (Control temperature in Heavy/Heavy-H/Bond paper modes)
> 166 (Control temperature during manual feeding)
> 173 (Control temperature for the second side of 2-sided copying)
> 179 (Control temperature in Postcard/S-Postcard/Envelope modes)
<Setting value>
0 to 2: +15 deg C
3 to 11: +12 to -15 deg C (each 3 deg C) [Default: 7]
12 to 14: -15 deg C
■
Down sequence control
● Down sequence when feeding small size paper
Purpose:
To prevent temperature rise of non-feeding area in the case of continuous print of
small size paper (less than A4 of length in width direction), fixing offset or deterioration
of fixing film.
Starting conditions:
When the detected temperature of sub thermistor (front) or (rear) reaches 255 deg C
or higher for 400 msec continuously.
Operation:
Temperature is reduced by making wider sheet-to-sheet distance with the maximum 4
steps to control the temperature at lower than the target temperature for normal print.
Fixing mode Step
B4
LGL B5
EXE A4R
LTRR
A5R
B5R
EXE-R
Free size Postcard Envelope
Plain paper
Thin paper
S-thin paper Normal 26 45 32 20 13 --- ---
1 20 20 20 18 8 --- ---
2 12 12 12 14 8 --- ---
3 10 10 10 14 8 --- ---
4 8 8 8 14 8 --- ---
Heavy paper Normal 17 30 21 17 13 --- ---
1 12 20 20 14 8 --- ---
2 10 12 12 14 8 --- ---
3 8 10 10 14 8 --- ---
4 8 8 8 14 8 --- ---
Heavy-H
paper Normal 17 25 17 17 13 --- ---
1 12 20 12 14 8 --- ---
2 10 12 10 14 8 --- ---
3 8 10 8 14 8 --- ---
4 8 8 8 14 8 --- ---
Bond paper
OHP Normal 13 25 14 17 13 --- ---
1 12 20 12 14 8 --- ---
2 10 12 10 14 8 --- ---
3 8 10 8 14 8 --- ---
4 8 8 8 14 8 --- ---
Postcard Normal --- --- --- --- --- 18 ---
1 --- --- --- --- --- 14 ---
2 --- --- --- --- --- 10 ---