Canon imageRUNNER 2520 Series Скачать руководство пользователя страница 312 | Manualshive

Страница: 312 / 402

Canon imageRUNNER 2520 Series Скачать руководство пользователя страница 312

Remote UI Service Mode

Function Overview

It is possible to display, configure, and execute various service mode modes as well as restart the host machine by using remote
UI.

Main Specifications

• Only English is available as the display language regardless of the language setting.
• The screen design remains remote UI.
• The following screen is displayed while accessing service mode from remote UI. When a user logs out from service mode,

it returns to the normal screen.

Remote service mode

• The normal screen of remote UI can be accessed/used even while accessing service mode from the Control Panel or remote

UI.

• Cache and favicon of the browser are disabled.
• The session information to be retained when logging in service mode from remote UI is discarded in the following cases.

• If the user logs out from service mode

If the user restarts the host machine
If the fixed time (3 minutes) has passed from the last access

If the browser is closed without logging out, the session information is not discarded. In that case, the user needs to wait for
a fixed time to let the session information is discarded.

• Clicking [REBOOT] button restarts the machine.

Operating conditions

In order to operate service mode using remote UI, the following conditions must be met.

8. Service Mode

302

«
...
310
311
312
313
314
...
»

Содержание imageRUNNER 2520 Series



















































































































































































































































































































































































































Отзывы:

Нет отзывов