manualshive.com logo in svg

Canon imageRUNNER 2520 Series, Руководство по обслуживанию, Страница: 118 / 402

Поделиться
Скачать
Canon imageRUNNER 2520 Series Скачать руководство пользователя страница 118

01/17 2009 10:14

***********************

*** E-RDS-COM-LOG ***

***********************

No.01  DATE 05 18 2009 TIME 03:21 CODE 05000003

Information    SUSPEND: Communication test is not performed.

No.02  DATE 05 18 2009 TIME 03:21 CODE 00000000

Information    SUNSEND: mode changed. 

No.03  DATE 05 18 2009 TIME 03:18 CODE 05000003

Information    SUSPEND: Communication test is not performed.

No.04  DATE 05 18 2009 TIME 03:18 CODE 00000000

Information    SUNSEND: mode changed. 

No.05  DATE 05 18 2009 TIME 01:56 CODE 05000003

Information    SUSPEND: Communication test is not performed.

 Service cautions

After performing the following service activities it is necessary to perform Service mode
#CLEAR > ERDS-DAT and #E-RDS.
Failure to do so will result that the counter transmitting value to the UGW may become unusual.

• System upgrade
• HDD format and system installation
• COPIER > Function > Clear > MN-CONT

Also, after replacing the main controller board, all settings must be reprogrammed.

The following settings in service mode must not be change unless there are specific
instructions to do so. Changing these values will cause error in communication with UGW.

Service mode

Default

#E-RDS > RGW-PORT

443

#E-RDS > RGW-ADDRESS

https://a01.ugwdevice.net/ugw/agentif010

2. Technical Explanation

108

Содержание imageRUNNER 2520 Series



















































































































































































































































































































































































































Отзывы:

Нет отзывов