Canon imageRUNNER 2320, Справочное руководство, Страница: 72 / 292

Basic Copying 2-20
Bas
ic O
p
er
at
ion
s
2
Basic Copying
This section describes the flow of basic copy operations.
NOTE
•
For instructions on turning ON the machine, see “Main Power and Control Panel Power,”
on p. 1-14.
•
For instructions on routine maintenance, see Chapter 6, “Routine Maintenance.”
•
The output quality may deteriorate if the platen glass is dirty. Always keep the platen
glass clean.
•
Do not touch the optional feeder or platen cover while copying. Rocking the feeder or
platen cover may distort the image being copied.
1
Press the appropriate keys in accordance with the messages
displayed on the LCD display.
If there are no messages displayed, proceed to step 2.
●
If the message <Dept. ID/Pass Input> appears:
NOTE
For instructions on using Department ID Management, see “Department ID
Management,” on p. 4-8.
❑
Enter your Department ID (up to seven
digits)
using - (numeric keys).
❑
Use [ ] or [ ] to select <Password:>
➞
enter the password (up to seven digits)
using
- (numeric keys).
❑
Press (ID).
ID Key after Input
When done press ID key
Dept. ID:0000001
Password:
Dept. ID/Pass Input
Dept. ID/Pass Input
Password:*******
ID Key after Input
When done press ID key
Dept. ID:0000001