Canon imageRUNNER 2320, Справочное руководство

Страница: 25 / 292

xxiii
CAUTION
•
Do not install the machine in unstable locations, such as unsteady platforms or
inclined floors, or in locations subject to excessive vibrations, as this may cause the
machine to fall or tip over, resulting in personal injury.
•
Never block the ventilation slots and louvers on the machine. These openings are
provided for proper ventilation of working parts inside the machine. Blocking these
openings can cause the machine to overheat. Never place the machine on a soft
surface, such as a sofa or rug.
•
Do not install the machine in the following locations:
- A damp or dusty location
- A location near water faucets or water
- A location exposed to direct sunlight
- A location subject to high temperatures
- A location near open flames
Power Supply
WARNING
•
Do not damage or modify the power cord. Also, do not place heavy objects on the
power cord, or pull on or excessively bend it, as this could cause electrical damage
and result in a fire or electrical shock.
•
Keep the power cord away from a heat source; failure to do this may cause the power
cord coating to melt, resulting in a fire or electrical shock.
•
Do not connect or disconnect the power cord with wet hands, as this may result in
electrical shock.
•
Do not connect the power cord to a multiplug power strip, as this may cause a fire or
electrical shock.
•
Do not bundle up or tie the power cord in a knot, as this may result in a fire or
electrical shock.
•
Insert the power plug completely into the power outlet, as failure to do so may result
in a fire or electrical shock.
•
Do not use power cords other than the power cord provided, as this may result in a
fire or electrical shock.
•
As a general rule, do not use extension cords. Using an extension cord may result in
a fire or electrical shock. If an extension cord must be used, however, use one rated
for voltages of 220 - 240 V AC and over, untie the cord binding, and insert the power
plug completely into the extension cord outlet to ensure a firm connection between
the power cord and the extension cord.