Canon imageRUNNER 2318 Скачать руководство пользователя страница 24 | Manualshive

Страница: 24 / 292

Canon imageRUNNER 2318 Скачать руководство пользователя страница 24

xxii

Important Safety Instructions

Please read these “Important Safety Instructions” thoroughly before operating the
machine. As these instructions are intended to prevent injury to the user or other
persons or destruction of property, always pay attention to these instructions. Also,
since it may result in unexpected accidents or injuries, do not perform any
operation unless otherwise specified in the manual. Improper operation or use of
this machine could result in personal injury and/or damage requiring extensive
repair that may not be covered under your Limited Warranty.

Installation

WARNING

•

Do not install the machine near alcohol, paint thinner, or other flammable
substances. If flammable substances come into contact with electrical parts inside
the machine, it may result in a fire or electrical shock.

•

Do not place the following items on the machine. If these items come into contact
with a high-voltage area inside the machine, it may result in a fire or electrical shock.
If these items are dropped or spilled inside the machine, immediately turn OFF the
main power switch, and disconnect the power cord from the power outlet. Then,
contact your local authorized Canon dealer.
- Necklaces and other metal objects
- Cups, vases, flowerpots, and other containers filled with water or liquids

«
...
22
23
24
25
26
...
»

Содержание imageRUNNER 2318





































































































































































































































































































Отзывы:

Нет отзывов