Things You Must Do Before Using This Machine
1-9
1
V
a
rious Sending Methods
Things You Must Do Before Using This Machine
This section describes the important setting registrations and procedures that must
be done before the machine is used for faxing operations.
According to recent amendments to the FCC (Federal Communications
Commission) rules governing the use of facsimile equipment in the United States,
the following sender information must be printed on every facsimile transmission:
•
Your fax number
•
Your personal name or company name
•
Time and date of transmission
IMPORTANT
•
If you attempt to use the machine without registering the necessary information correctly,
the machine may not function properly.
•
You need to set up network settings if you want to send to an e-mail address, I-fax
address, or file server. (See the
Network Guide
.)
NOTE
To send documents to another fax machine, it is necessary for the Super G3 Fax Board
(optional) to be installed.
■
Setting the Fax Line Type
To set the type of telephone line connected to the machine, check whether it is a rotary
dial (rotary pulse) or a touch-tone type, and make the correct setting. (See “Selecting the
Type of Telephone Line (Tel Line Type),” on p. 1-11.)
