manualshive.com logo in svg

Canon imageRunner 2220i, Руководство пользователя

Поделиться
Скачать
Canon imageRunner 2220i Скачать руководство пользователя страница 140

Changing the Scan Settings

1-119

V

a

rious Sending Methods

1

NOTE

If Preview is set to ‘On’, you can preview the images of documents before sending. 
(See “Previewing Originals (Preview),” on p. 1-178.)

Frame Erase

This mode erases shadows and lines that appear when scanning some types of 
originals. 

The following three Frame Erase features are available.

IMPORTANT

•

A combination of the following three modes cannot be set. If you select one of these 
modes, the previously set mode is canceled.

•

When the machine is operating in the Frame Erase mode, you cannot use Direct Sending 
for Fax. 

■

Original Frame Erase

Erases the dark borders and frame lines that appear around the scanned image if the 
original is smaller than the selected document size. You can also use this mode to create 
a blank border around the edge of the scanned image.

IMPORTANT

When the machine is operating in the Original Frame Erase mode, you cannot use the 
Document Size Select (Auto, Other Size, Long Strip Original), Different Size Originals, 
and Stamping Original modes.

■

Book Frame Erase

Erases the dark borders, as well as the center and frame lines that appear when scanning 
the facing pages in a book or bound original.

IMPORTANT

When the machine is operating in the Book Frame Erase mode, you cannot use the 
Document Size Select (Auto, Other Size, Long Strip Original), Different Size Originals, 
and Stamping Original modes.

■

Binding Erase

Erases the shadows that appear on a scanned image from binding holes on the original.

IMPORTANT

•

When the machine is operating in the Binding Erase mode, you cannot use the 
Document Size Select (Other Size, Long Strip Original), or Two-page Separation modes.

•

Do not place originals with binding holes into the feeder, as this may damage the 
originals.

Содержание imageRunner 2220i



















































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды