manualshive.com logo in svg

Canon imageRunner 2004, Руководство пользователя

Поделиться
Скачать
Canon imageRunner 2004 Скачать руководство пользователя страница 308

Connecting to a Network

1053-04J

When connecting the machine to a wired or wireless local area network (LAN), you need to set an IP address unique to

the selected network. Select "wired" or "wireless" depending on your communication environment and networking

devices. For steps to connect the machine and set an IP address, see "Getting Started" (  Manuals Included with the

Machine(P. 596) ). For specific IP address settings, contact your Internet service provider or Network Administrator.

If the machine is connected to an unsecured network, your personal information might be leaked to a third

party.

●

The machine cannot connect to both wired and wireless LANs at the same time.

●

The machine does not come with a LAN cable or router. Have them ready as necessary.

●

For more information about your networking devices, see the instruction manuals for the devices or contact
your manufacturer.

◼

Before You Start

Follow these steps to connect the machine to a network.

 

 

Check your computer settings.

●

Make sure that the computer is correctly connected to the network. For more
information, see the instruction manuals for the devices you are using, or contact the
device manufacturers.

●

Make sure that the network settings have been completed on the computer. If the
network has not been set up properly, you will not be able to use the machine on the
network, even if you perform the rest of the procedure below.

●

Depending  on  the  network,  you  may  need  to  change  settings  for  the
communication  method  (half-duplex/full-duplex)  or  the  Ethernet  type  (10BASE-T/
100BASE-TX)  (  Configuring  Ethernet  Settings(P.  340)  ).  For  more  information,
contact your Internet service provider or Network Administrator.

●

To check the MAC address of the machine, see  Viewing the MAC Address(P. 327) .

 

Network (imageRUNNER 2204F / 2204N / 2004N)

300

Содержание imageRunner 2004













































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды