Canon imageRUNNER 1025 Скачать руководство пользователя страница 264 | Manualshive

Страница: 264 / 327

Canon imageRUNNER 1025 Скачать руководство пользователя страница 264

12-15

M

aint

enanc

e

Transporting the Machine

Transporting the Machine

Follow this procedure to avoid vibration damage to the machine when transporting it over a

long distance.

Be sure at least two people carry the machine.

1

Disconnect the power cord and all the
cables from the back of the machine.

2

Make sure the stack bypass and the paper
stopper are back in their original position.

3

Pick up the machine using the provided
hand grips on the left and right sides.

Be sure at least two people carry the machine.
Do not lift the machine by any of its
attachments. Dropping the machine can cause
personal injury.
If you are using the Cassette-Feeding Module-
N2 (optional), transport the machine and the
Cassette-Feeding Module-N2 separately. If you
transport the machine with the Cassette-
Feeding Module-N2 being installed, you may
drop the machine.
If you have a back problem, make sure to check
the weight of this machine before carrying. (See
“Specifi cations,” on p. 15-2.)

–
–

–

–

«
...
262
263
264
265
266
...
»

Содержание imageRUNNER 1025








































































































































































































































































































































Отзывы:

Нет отзывов