Canon imageRUNNER 1025 Скачать руководство пользователя страница 20

Страница: 20 / 327

xix

Legal Notices

Legal Notic

(c)

Redistribution and use in source and binary forms are permitted provided that the above copyright notice

and this paragraph are duplicated in all such forms and that any documentation, advertising materials, and

other materials related to such distribution and use acknowledge that the software was developed at Cygnus

Solutions. Cygnus Solutions may not be used to endorse or promote products derived from this software

without specifi c prior written permission.

THIS SOFTWARE IS PROVIDED “AS IS’’ AND WITHOUT ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING,

WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR

PURPOSE.

The software was developed at Cygnus Solutions.

Disclaimers

The information in this document is subject to change without notice.

CANON INC. MAKES NO WARRANTY OF ANY KIND WITH REGARD TO THIS MATERIAL, EITHER EXPRESS OR

IMPLIED, EXCEPT AS PROVIDED HEREIN, INCLUDING WITHOUT LIMITATION, THEREOF, WARRANTIES AS TO

MARKETABILITY, MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OF USE OR NON-INFRINGEMENT.

CANON INC. SHALL NOT BE LIABLE FOR ANY DIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES OF ANY

NATURE, OR LOSSES OR EXPENSES RESULTING FROM THE USE OF THIS MATERIAL.

For CA, USA only

Included battery contains Perchlorate Material - special handling may apply.

See http://www.dtsc.ca.gov/hazardouswaste/perchlorate/ for details.

Содержание imageRUNNER 1025








































































































































































































































































































































Результаты поиска

Содержание imageRUNNER 1025

Отзывы:

Бренды по названию

Популярные бренды

Canon imageRUNNER 1025, Основное руководство по эксплуатации

Результаты поиска

Содержание imageRUNNER 1025

Отзывы:

Бренды по названию

Популярные бренды