manualshive.com logo in svg

Canon imagePROGRAF TX-3100, Онлайн-руководство

Поделиться
Скачать
Canon imagePROGRAF TX-3100 Скачать руководство пользователя страница 716

Defaults

Restores all the settings you have changed to their default values.
Clicking this button restores all the settings on the current screen to their default values (factory
settings).

Paper Detailed Settings dialog box

Drying Time

Wait time can be set to allow ink to dry. 

Between Pages

 settings are only enabled for roll paper.

Between Pages

The wait time until outputting paper can be set after printing one page. Time is taken before
cutting roll paper to allow the ink to dry, so even when 

Automatic Cutting

 in the 

Roll Paper

Options

 dialog box of the 

Page Setup

 tab is set to 

Yes

, page may be dropped into the basket

with dried ink.

Printer Default

Settings in printer unit operation panel are applied.

None

Page will be output immediately after printing

30 sec. / 1 min. / 3 min. / 5 min. / 10 min. / 30 min. / 60 min.

Page will be output after set amount of time has passed after printing.

Between Scans

The wait time until printing next scan can be set after printing one scan in page. Set in the event
smudging occurs in the page, unevenness occurs in borderless printing, etc., and you would like
to avoid this smudging and unevenness.

Printer Default

Settings in printer unit operation panel are applied.

None

Next scan will be print immediately after first scan is print.

0.5 sec. / 1 sec. / 3 sec. / 5 sec. / 7 sec. / 9 sec.

Next scan will be print after the set amount of time has passed after printing one scan.
* If smudges and/or unevenness occur, please increase time.

Roll Paper Safety Margin

In order for heavily curling paper to absorb well in platen, length of margin established on edge of
paper can be selected.

Near End Margin

Roll 

Near End Margin

 length can be set.

Printer Default

Settings in printer unit operation panel are applied.

3mm

Will be print in standard size.
* Please select when there are no particular problems with printing.

20mm

Please select when rubbing of the print heads occurs, such as when heavily curling paper is
being used.

716

Содержание imagePROGRAF TX-3100




























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды