manualshive.com logo in svg

Canon imagePROGRAF iPF8300, Руководство пользователя

Поделиться
Скачать
Canon imagePROGRAF iPF8300 Скачать руководство пользователя страница 1116

Cause

Corrective Action

The temperature or humidity where
the printer is installed is out of the
acceptable range for operation.

 (See "

Types of Paper

.")

→P.768

Press 

▲

 or 

▼

 to select 

Continue

, and then press the 

OK

 button to continue

with color calibration. However, note that correct adjustment may not be possi-
ble.

Borderless printng not possible. Paper stretched or shrank.

Cause

Corrective Action

The loaded roll has expanded or contracted due to environmen-
tal conditions, making it wider or narrower than the supported
width for borderless printing.

Press the 

OK

 button to stop printing.

Use each type of paper only where the recommended
environmental conditions are met. For details on en-
vironmental conditions for various paper, see the Pa-
per Reference Guide.

 (See "

Types of Paper

.")

→P.768

Before borderless printing, move the blue platen switch.

Cause

Corrective Action

The blue Switch on the platen was set to the side
opposite ● when a borderless print job was re-
ceived.

Before borderless printing, set the blue Switch on the platen to
the ● side.

 (See "

Setting the Blue Switch on the Platen

.")

→P.1063

Blue platen switch is dirty.

Cause

Corrective Action

The blue Switch on the platen is dirty.

Open the Top Cover and clean the blue Switch on the platen.

 (See "

Cleaning Inside the Top Cover

.")

→P.1026

Move the blue platen switch No.xx to the right. (xx represents a number)

Cause

Corrective Action

The printer has detected that the blue Switch on the
platen needed in maintenance during printing is set
away from the ● mark.

Set blue platen Switch of the indicated number toward the ●
side.

 (See "

Setting the Blue Switch on the Platen

.")

→P.1063

Cannot adjust paper feed.

Cause

Corrective Action

The Printhead nozzles are clogged.

Execute 

Adj. Quality

 again, as follows.

1.

Press the 

OK

 button to clear the error.

Error Message 

>

 Messages regarding printing or adjustment 

>

Borderless printng not possible. Paper stretched or shrank.

iPF8300

13

1098

Downloaded from ManualsPrinter.com Manuals

Содержание imagePROGRAF iPF8300































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды