Canon imagePRESS Server G200 Скачать руководство пользователя страница 74

Страница: 74 / 98

Printer Default Personality

Sets the personality of the printer. To access this option, choose

Configure

RIP

Printer Default Personality

•

If set to

Auto

, the PDL type of incoming jobs is automatically detected and sent to the appropriate interpreter.

•

If set to

PCL

, incoming jobs are sent to the PCL interpreter. If set to

, incoming jobs are sent to the PS

interpreter.

Variable Data Printing (VDP) settings

To access the VDP settings, open Configure and select

RIP

VDP

FreeForm 1 Record Length

Defines the length of each record, either based on the number of pages in the variable job, or the number of pages in

the FreeForm Master.

Native Document settings

To access the Native Document settings, select

Configure

RIP

Native Documents

Enable Native Document conversion using PrintMe

Enables the imagePRESS Server to process native document file formats through the PrintMe Cloud Service.

Send licensing updates to the Fiery Administrator email address

Enables the imagePRESS Server to send licensing updates to the administrator email address. E-mail Service must be

enabled, and an administrator email address must be configured.

Note:

This option is only available through Configure. It is not available through the printer control panel.

Note:

This option is only available when

Enable Native Document conversion using PrintMe

is selected.

Configuration and Setup

Configuring print job processing settings

Содержание imagePRESS Server G200



































































































Результаты поиска

Содержание imagePRESS Server G200

Отзывы:

Похожие инструкции для imagePRESS Server G200

Бренды по названию

Популярные бренды

Canon imagePRESS Server G200, Конфигурация и настройка

Результаты поиска

Содержание imagePRESS Server G200

Отзывы:

Похожие инструкции для imagePRESS Server G200

Бренды по названию

Популярные бренды