Canon imagePRESS Server F200 Скачать руководство пользователя страница 9 | Manualshive

Страница: 9 / 109

background image

I

NTRODUCTION

9

I

NTRODUCTION

This document includes information about servicing the imagePRESS Server. In this
document, the Canon imagePRESS Server F200 is referred to as “the imagePRESS Server.”

Document conventions

N

OTE

:

The NOTE format highlights important messages and additional information.

The WARNING icon indicates a warning concerning operations which, if not performed
correctly, may lead to death or injury. To use the imagePRESS Server safely, always pay
attention to WARNING icons and messages.

The CAUTION icon indicates a caution concerning operations which, if not performed
correctly, may lead to injury. To use the imagePRESS Server safely, always pay attention to
CAUTION icons and messages.

The IMPORTANT icon indicates operational requirements and restrictions. To operate the
imagePRESS Server correctly and avoid damage to the imagePRESS Server or other property,
always pay attention to IMPORTANT icons and messages.

About the imagePRESS Server

The imagePRESS Server adds computer connectivity and highly efficient Adobe PostScript 3
color printing capability to the copier. It is optimized for high-speed network
communications, processing, rasterization, and printing of color and black-and-white pages.

As an integral part of a color printing system, the imagePRESS Server enables users to:

• Send images over TCP/IP networks to imagePRESS Server-supported devices.

• Spool print jobs and select a printing priority for each job. Users can control spooled print

jobs sent to the imagePRESS Server with remote user software running on networked
Windows and Mac OS computers.

• Print color, grayscale, and black-and-white jobs.

• Use the copier as a high-resolution color scanner with Fiery Scan software.

• Use 136 resident fonts (126 Adobe Type 1 PostScript, and 10 TrueType), plus several

Adobe Multiple Master fonts used for font substitution when printing PDF files. Use
Command WorkStation or any third-party LaserWriter downloader, such as the
Adobe Font Downloader, to download additional fonts.

• Use built-in ColorWise color management and NetWise network features.

The imagePRESS Server also supports the Microsoft version of Internet Printing Protocol
(IPP) for Windows 8, Windows 7, Windows XP, Windows Vista, Windows Server 2003/
2008/2008 R2/2012, and e-mail printing.

«
...
7
8
9
10
11
...
»

Содержание imagePRESS Server F200














































































































Отзывы:

Нет отзывов

Похожие инструкции для imagePRESS Server F200

Бренд: Oki Страницы: 33

Бренд: Oki Страницы: 11

Бренд: OKIDATA Страницы: 58

Бренд: Samsung Страницы: 165

Inkjet SCX-1150F

Бренд: Samsung Страницы: 66

Бренд: Samsung Страницы: 319

Бренд: TallyGenicom Страницы: 310

Бренд: TallyGenicom Страницы: 330

Бренд: Oki Страницы: 54

Бренд: Oki Страницы: 54

Бренд: Oki Страницы: 103

Бренд: Oki Страницы: 256

Бренд: Oki Страницы: 2

Бренд: Oki Страницы: 36

Бренд: Oki Страницы: 63

Бренд: Oki Страницы: 28

Бренд: Oki Страницы: 616

Бренд: Oki Страницы: 32

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды