Canon imagePRESS Server B5000, Конфигурация и настройка

Страница: 19 / 128

Windows networks
You must configure the imagePRESS Server to work with Windows networks.
The imagePRESS Server requires a valid IP address, subnet mask, and gateway address
Type these addresses manually or use the DHCP protocol to assign them dynamically. Make sure the imagePRESS
Server name and address are listed in a domain name server (DNS) or host name database used by your system.
If more than one imagePRESS Server print connection is published (for example, if both the Print queue and Hold
queue are published), consider creating a printer for each print connection, so that users can print to each
connection directly.
Configure the imagePRESS Server with the correct Windows domain name
This is especially important for Windows printing, also known as Server Message Block (SMB) printing. To use
Microsoft Active Directory, you must assign the imagePRESS Server to a domain. If you assign the imagePRESS
Server to a workgroup, you cannot use Microsoft Active Directory.
AppleTalk networks (only for font download support)
AppleTalk networks support font downloads only, if you enable AppleTalk.
To allow Mac OS computers to access Bonjour printers, you must enable Bonjour.
You can find related settings in the following locations:
•
In Configure, see
Network
>
AppleTalk
.
•
In Configure, see
Network
>
Bonjour
.
UNIX networks
You must configure the imagePRESS Server to work with UNIX networks.
Note the following information about using UNIX networks with the imagePRESS Server:
•
When you configure a UNIX workstation with the LPR protocol and connect to the imagePRESS Server over a
TCP/IP network, you can print directly to the imagePRESS Server.
• Setting up UNIX workstations requires an administrator with root privileges. After the initial configuration,
UNIX users submit print jobs to a named printer.
•
The imagePRESS Server is a printer controller that understands LPR protocols.
•
The imagePRESS Server has a remote printer name that you must use in order to communicate with it
successfully.
Regardless of the UNIX workstation you use, the name that you use for the remote printer (or rp in the /etc/printcap
file) in configuring the network for the imagePRESS Server must be one of the following:
• print
•
hold
•
name of virtual printer (virtual printers display as printer name : virtual printer name)
•
sequential
Configuration and Setup
System requirements
19