Canon
imagePRESS Lite C170 Series Service Guide
imagePRESS Lite C170 Series Service Guide
March 2022
Revision 11
Page 109
Table 70 – Copy Tray-R2 Specifications
Item
Specifications
Paper Size/Weight/Type
Paper available for the Main Unit
Capacity
1-side: 250 sheets (21 lb bond (80 g/m²))
2-side: 100 sheets (21 lb bond (80 g/m²))
Dimensions (W x D x H)
9 5/8" (16 1/2"*) x 15" x 6 7/8" (244 mm (420 mm*) x 382 mm x 175 mm)
* When the auxiliary tray is extended
Weight
Approximately 2.4 lb (1.1 kg)
Installation Space
Including the Main Unit
(W x D)
58 1/2" x 37 1/8" (1,487 mm* x 941 mm) (When the auxiliary tray is
extended)
Table 71 – Copy Card Reader-F1 Specifications
Item
Specifications
Available Cards
Magnetic
Card Readout Method
Magnetic readout
Magnetic Card Reading
Direction
Face up
Store/Replay
Replay
Power Source
From the main unit
Dimensions
(W x L x H)
3 1/2" x 3 13/16" x 1 5/8" (88 x 96 x 40 mm)
(excluding the attachment kit and cable)
Weight
Approximately 7.1 oz (200 g)
(including the attachment kit and cable)
Table 72 – Super G3 Fax Board-AS2 Specifications
Item
Specifications
Telephone Line Used
Public Switched Telephone Network
(When using an IP telephone service, facsimile communication may not
be performed normally via an IP telephone line. It is recommended to
use facsimile communication via a general telephone (Public Switched
Telephone Network) line.)
Scan Line Density
(Scan Transmission)
Normal: 8 pels (Picture elements (pixels).)/mm x 3.85 line/mm
Fine: 8 pels/mm x 7.7 line/mm
Super-Fine: 8 pels/mm x 15.4 line/mm
Ultra-Fine: 16 pels/mm x 15.4 line/mm
Transmission Speed
Super G3: 33.6 kbps
G3: 14.4 kbps
Compression Method
MH, MR, MMR, and JBIG
Transmission Type
Super G3 and G3
Sending Original Sizes
11" x 17"
Receiving Paper Sizes
11" x 17" to STMTR
Transmission Times
JBIG: Approximately 2.6 seconds
Содержание imagePRESS Lite C170
Страница 1: ...Canon Service Guide ...