1
1
1-40
1-40
Initial Setup > Adjustments/Settings > Display Log Menu Screen
Initial Setup > Adjustments/Settings > Display Log Menu Screen
Display Log Menu Screen
Selects a target of the log to be displayed. The log of jam (JAM), error (ERR) and alarm
(ALARM-2) can be displayed.
1) Press [Display Log] of the operator maintenance basic screen.
NOTE:
[Display Log] is not displayed in the normal setting, therefore this function cannot be
used.
If [Display Log] needs to be displayed for the use of this function, contact a servicing
person.
[Display Log] is not displayed in the Replacement/Cleaning mode, therefore this
function cannot be used.
F-1-77
-> The display log menu screen is displayed.
2) Select an item whose log needs to be displayed via the display log menu screen, and
press the key.
-> The display log screen of the selected item is displayed.
3) Confirm the log on each display log screen. After confirming them, press [Close].
-> Return to the display log menu screen.
4) Press [Close] of the display log menu screen.
-> Return to the operator maintenance basic screen.
F-1-78
