Canon imagePRESS C7011VPS series, Руководство по эксплуатации, Страница: 107 / 391

Handle media
Load the media into the paper tray
Introduction
This section describes how to load the media into a paper tray.
When you load the media via the [Load] button in the [Schedule], the media is automatically
assigned to the correct tray.
When you load and assign the media via the [Assign] button in the [Trays] view, you must assign
the loaded media to the corresponding paper tray manually.
CAUTION
The lifter inside the paper trays rises and descends automatically. When loading paper, be
careful not to get your fingers caught, as this may result in personal injury.
IMPORTANT
Do not lift up the lifter inside the paper trays while the main power is ON, as this may result in a
malfunction or damage to the machine. If you need to lift up the lifter, for example, if you drop
objects, turn OFF the main power with the paper trays open. See
Turn off the system on page 45
.
NOTE
The following paper sizes can be loaded into right/left paper trays.
• 330.2 mm x 482.6 mm, 320 mm x 450 mm (SRA3), 304.8 mm x 457.2 mm, A3, B4, A4, A4R, B5,
B5R, and irregular sizes (182 mm x 182 mm to 330.2 mm x 487.7 mm)
• 13" x 19", 12.60" x 17.72", 12" x 18", 11" x 17", LGL, LTR, LTRR, EXEC, and irregular size (7 1/8"
x 7 1/8" to 13" x 19 13/64")
CAUTION
When loading paper, take care not to cut your hands on the edges of the paper.
Handle media
Chapter 7 - Media handling 107