Canon imagePRESS C7010VPS/C6010VPS/C6010S Series Скачать руководство пользователя страница 38 | Manualshive

Страница: 38 / 100

Canon imagePRESS C7010VPS/C6010VPS/C6010S Series Скачать руководство пользователя страница 38

Make a perfect-bound book

Introduction

The perfect binder is an optional finisher. This finisher enables you to create a perfect-
bound book.

#

NOTE

• Perfect binding is only available for print jobs, not for copy jobs.
• Perfect binding can only be applied to a job via job preparation software like the

driver, PRISMAPrepare, or other job preparation applications.

• On the operator panel perfect binding can only be disabled for a job, but can not

be enabled for a job.

Before you begin

Load the media for the body sets and, if needed, the covers.

Make a perfect-bound book

1.

Define the book that you want to be perfect-bound, via the driver, PRISMAPrepare, or
other job preparation applications.

2.

Send it to the printer.

3.

Change job properties, if needed.

#

NOTE

You are only allowed to change the trimming, or the used paper (but not the paper
size). See the manual of the printer how to change these properties.
And of course you can disable perfect-binding in the job properties.

4.

Print the perfect-bound book.

Chapter 3 - Basic operations

38

Make a perfect-bound book

«
...
36
37
38
39
40
...
»

Содержание imagePRESS C7010VPS/C6010VPS/C6010S Series





































































































Отзывы:

Нет отзывов