Canon imagePRESS C1+, Справочное руководство, Страница: 106 / 622

Placing Originals 2-34
2
Basic Oper
ations
Placing Originals
Place your originals on the platen glass or into the feeder, depending on the size and type of the
original, and the copy modes that you want to use.
NOTE
•
If the original has too many pages to be placed in the feeder all at once, use the Job Build mode on the
Special Features screen. (See Chapter 4, "Special Copying and Mail Box Features," in the Copying and
Mail Box Guide or Chapter 4, "Special Scanning Features," in the Sending Guide.)
•
This function is available only if the optional Color Image Reader-H1 is installed.
■
Platen Glass
Place the originals on the platen glass when copying bound originals (such as books and magazines),
heavy or lightweight originals, and transparencies.
■
Feeder (Optional)
Place the originals into the feeder when you want to copy several originals at the same time, and press
. The machine automatically feeds the originals to the platen glass and scans them. Two-sided
originals can also be automatically turned over and scanned as two-sided documents.
■
SADF Tray (Optional)
Place the originals one by one into the SADF (Single Automatic Document Feeder) tray when scanning
originals on heavy or lightweight paper.
Document Sizes
The size of the original is automatically detected, and the document is scanned.
The machine cannot always detect the size of the original if it is a nonstandard paper size, such
as a book. In this case, specify the size at which you want to scan the original. (See Chapter 3,
"Basic Scanning Features," in the
Sending Guide .)