Canon imagePRESS C1+, Руководство пользователя

Страница: 19 / 36

Case 3 How to Coat the Full Surface of Preprinted Paper K2-12
Search Previous Page Back Next Page
CHA P TER 2 CHA P TER 2 CHA P TER 1 CHA P TER 1
Case 3 How to Coat the Full Surface of Preprinted Paper
This section describes how to coat the full surface of paper that already
has printing on it (preprinted paper).
In this case, the following procedure describes how to make two copy
sets with coated preprinted paper, and stapled in the top-left corner from
the Coating Basic Features screen.
NOTE
If you want to change the amount of clear toner deposited on paper, you can
adjust the clear toner density from the Additional Functions screen. This
section also describes how to adjust the clear toner density after the copies
are output.
■
Finished Sample
■
Material Requirements
■
Workflow
3-1 Load the preprinted paper.
3-2 Specify the Coating settings from the Coating Basic Features
screen.
3-3 Adjust the clear toner density from the Additional Functions
screen.
Repeat steps 3-1 and 3-2, and check the print results.
NOTE
•
Paper Drawer 1 is used as the paper source in this example.
•
The optional Saddle Finisher-AA2 is used for stapling in this example.
Preprinted Paper (Two Sets)
➞➞