Canon imagePRESS A3200, Инструкция по установке и обслуживанию

Страница: 43 / 192

I
NSTALLATION
43
Completing the installation
To complete the installation of the imagePRESS Server at the customer site, do the following:
1. Print the Test Page and Configuration page (see “Printing imagePRESS Server pages” on
page 49 ).
2. Ask the customer to verify the output.
3. Perform any required system upgrades. For instructions, see the documentation that
accompanies the system upgrade.
4. Inform the network administrator that they should perform Setup and print some test
documents over the network.
5. After the network administrator has completed Setup, use the Fiery Clone Tool DVD to copy
the contents of the imagePRESS Server HDD to an image file.
The resulting clone image file contains the entire contents of the imagePRESS Server C, D,
and E HDD partitions, with the exception of any print jobs in the print queues. In the future,
if required, this clone image may be used to restore the imagePRESS Server to its initial
configuration.
For detailed instructions, see the documentation included on the Fiery Clone Tool DVD.
The Fiery Clone Tool DVD is included in one of the media packs that ship with the
imagePRESS Server.
6. Notify the customer trainers that you are finished (by faxing the output, if necessary).
7. Store the output and the current Configuration page(s) near the copier.
8. Inform the site administrator that imagePRESS Server user software must be installed on
networked computers that print to the imagePRESS Server.
9. Ask the site administrator to make sure that all media shipped with the imagePRESS Server is
stored in a safe location, accessible to you.
10. For additional installation instructions, see any additional service documentation for
the imagePRESS Server.