Canon imageFORMULA ScanFront 400 Скачать руководство пользователя страница 53

Страница: 53 / 108

Chapter 4 Operating Procedures

Turning the Power ON and OFF

Use the power button to turn the scanner ON, and press the [Power off] button on the touch panel to turn it OFF.

❏

Turning the Power ON

Press the power button to turn the scanner ON. The power
button lights, and the Home screen or the login screen
appears.

Hint

• Wait a moment for the Home screen to appear after pressing

the power button to turn the scanner ON.

• If users have been registered, the login screen appears. (See

“Login Screen” on p. 55.)

• When the power indicator is lit but nothing appears on the

touch panel, Display Off has activated to turn the panel display
off. You can touch the touch panel to restore the display.
(Refer to “Adjust the wait time until the display automatically
turns off.” on p. 152 of the

ScanFront 400 INSTRUCTIONS

• When the power indicator is flashing but nothing appears on

the touch panel, the Low Power mode has activated to
temporarily stop scanner operations. To switch out of Low
Power mode, press the power button. (Refer to “Adjust the
wait time until the Low Power Mode.” on p. 152 of the

ScanFront 400 INSTRUCTIONS

• The touch panel display may appear dark at times. In such

cases, touching the panel will restore it to its normal
brightness.

Home screen

Power button

Содержание imageFORMULA ScanFront 400













































































































Результаты поиска

Содержание imageFORMULA ScanFront 400

Отзывы:

Бренды по названию

Популярные бренды

Canon imageFORMULA ScanFront 400, Руководство по установке и эксплуатации

Результаты поиска

Содержание imageFORMULA ScanFront 400

Отзывы:

Бренды по названию

Популярные бренды