Canon imageFORMULA ScanFront 400, Руководство по установке и эксплуатации

Страница: 43 / 108

Chapter 3 Handling
43
• For Folio scanning, set [Non Separation Feeding Mode] to
[ON]. Place documents one at a time.
• Adjust the document guides to fit the width of the document.
Otherwise, the image may scan as skewed or shifted.
Hint
• When placing folded documents, place the document into the
scanner so that the fold is on the right side. The side of the
folded document facing you will become the right side of the
combined image.
• When scanning a document that is folded in half, set
[Scanning Side] to [Folio].
• The maximum size for combined images is A3. When
scanning a folded document of a size other than the standard
formats, set [Page Size] to [Auto size].
• When scanning a document that is folded in half, set
[Resolution (dpi)] to 300 dpi or less.
• When scanning a document that is folded in half, the [Double
feed detection by Ultrasonic] function cannot be used.
❏
Placing a Long Document
You scan documents up to 120" (3048 mm) in length.
IMPORTANT
• When scanning a long document, set [Page Size] to [Auto size
(Long)].
• When scanning a long document, set [Resolution (dpi)] to 200
dpi or less.
• You cannot set [Scanning Side] to [Folio] when scanning a
long document.
❏
Placing a Card
When you want to scan a card, follow the procedure below
to place the card.
1.
Set [Non Separation Feeding Mode] to [ON].
2.
Adjust the document guides to match the width of the
card.
3.
Place the card face down with the top edge at the
bottom of the tray.