5-22
Chapter 5 Operating Procedures
8.
Registering and Editing Addresses
If an address to which you want to send an image file is not registered in the address book or the information of a registered address
has not been updated, use the procedure below to register a new address or modify an address in the address book.
❏
Registering a New Address
1.
Make selections for [Address Book type] and
[Address type], press [Edit], and then press [New].
2.
Register the address in accordance with the setting
conditions of the address type.
E-mail Registration Screen
• Name
Enter the name to appear in the address book.
• E-mail address
Enter the sender’s address for when image files are sent
by e-mail.
Shared Folder Registration Screen
• Name
Enter the name to appear in the address book.
• Host name
Enter the name of the computer containing the publicly
shared folder. When the ScanFront Service is running,
you can enter the IP address instead of a host name.
• Folder path
Enter the name of the shared folder and the path of the
sub-folder to register.
