4-7
Chapter 4 Web Menu (Administrator Mode)
❏
Registering New Users
Click [New User] to register a new user.
IMPORTANT
• When using an authentication server
, users that
are logged in from an authentication server account are
registered automatically.
• If an e-mail address is registered for the authentication server
account, the e-mail address is also registered automatically.
• If an e-mail address is not registered for the authentication
server account, the e-mail address is not registered. Register
an e-mail address by editing the user settings
Authentication Method: Device Authentication
The authentication method for newly registered users is
Device Authentication, and user authentication is
performed on the ScanFront (device).
Hint
The authentication method for users logged in from an
authentication server account and automatically registered is
Server Authentication.
User name/Password
Enter the user name and password to use for login.
Password (confirmation)
Enter the same password again for confirmation.
Mail Address
Enter the originating address for e-mail sent from the
scanner.
IMPORTANT
• Users are not permitted to register and change e-mail
addresses. Make sure e-mail addresses are registered and
changed by the administrator.
• If no e-mail address is registered, the administrator’s e-mail
address is used as the originating e-mail address.
“Device Configuration” on p. 4-24.)
SMTP/POP Before SMTP Authentication
Appears when [Auth Method] is configured to any setting
other than [SMTP] in the mail server settings
Enter the [User name] and [Password] that will be used for
mail server authentication here.
IMPORTANT
Confirm the [User name] and [Password] with the user before
entering them. Otherwise, have the user enter them directly
under [User Settings] of the Web Menu (User Mode)
Screen after Login
Select the Home screen or the Job Button screen as the first
screen to appear after the user logs in.
• Home Screen
