6-24
Chapter 6 Operating Procedures
❏
Scan Settings
The scan settings include basic condition settings (page
size, mode, resolution, scanning side, and brightness) and
detailed settings for scanning.
Basic Condition Settings
Paper Size
Select the size of the document you want to scan.
Hint
Select [Auto size] to automatically detect the size of the
scanned document.
Mode
Select the mode for scanning.
IMPORTANT
The selection of modes is limited depending on the setting set
for File Format
.
Resolution
Select the resolution for scanning.
Scanning Side
Select the method for scanning the document (Simplex,
Duplex, Skip Blank Page).
Hint
• The Skip Blank Page option scans both sides of a document
and skips saving any image it determines to be a blank page.
• Selecting Skip Blank Page enables the skip blank page setting
in the detailed settings.
(See “Skip Blank Page” on p. 6-25.)
Brightness
Adjust the brightness to match the density of the
document.
Hint
When you want to scan both sides of a document that has front
and back sides of different densities, you can change the
settings for the brightness of the front side and back side
separately in the detailed settings and then perform scanning.
Paper size
Mode
Resolution
Scanning
side
TIFF
JPEG
