background image

18

Features of the Scanner

The main features of the DR-M260 document scanner are described 
below.

Compact Design
The scanner has a compact size of 285 mm (11.22")(W) x 180 mm 
(7.09")(D) x 178 mm (7.01")(H) when the document feed tray is 
removed.

Fast Document Feeding
Documents can be scanned at a speed of up to 60 pages per 
minute (when scanning one-sided or two-sided documents of A4 
size at 200 dpi).

High Image Quality
The 600 dpi optical resolution sensor incorporated in the scanner 
enables documents to be scanned with high image quality.

USB3.1 Gen1 Interface
The scanner supports SuperSpeed USB3.1 Gen1

Color/Grayscale Support
Documents can be scanned in 24-bit color or 256-level grayscale.

Supports a Variety of Scanning Modes
The scanner supports the following scanning modes, depending on 
the document type:
• Single-sided or double-sided scanning (with Skip Blank Page 

function)

• Continuous or single sheet feed

Card Scan
You can scan business or ID cards.

Paper Size Detection
The scanner automatically detects the size of a scanned document 
and eliminates any unnecessary space around the edges of the 
image when storing the image, even when storing a document of 
irregular size.

Auto Color Detection
The scanner detects whether the scanned document is in color, 
grayscale, or black and white, and saves the image accordingly.

Full Auto Mode
A Full Auto Mode is provided in CaptureOnTouch to allow scanning 
under automatically determined conditions. Scanning conditions 
such as the color mode and page size are set automatically based 
on the document being scanned.

Auto Resolution Detection
When enabled in the CaptureOnTouch or scanner driver settings, 
this function detects the content of documents and determines the 
scanning resolution automatically.

Folio Scan
You can scan folded documents. The scanner will scan both sides 
and combine the scanned images into a single image.

Deskew
The scanner is equipped with a deskew function that straightens 
images before saving them when documents are scanned askew. 
The scanned images are straightened, as opposed to the actual 
document sheets.

Ultrasonic Double Feed Detection
Ultrasonic waves are used to detect pages that are fed at the same 
time as well as the space between pages. Scanning stops if a 
double feed is detected.

Double Feed Detection Ignore
When a double feed is detected, error is displayed on the operation 
panel . Save, select Continue and press the OK button, to continue 
with the scanning.

Double Feed Retry
When a double feed has occurred, this function returns the 
document to the document feeder and re-feeds the pages.

Text Orientation Detection
The text orientation on each page is detected, and the scanned 
image is rotated in 90-degree increments as necessary for 
normalization.

Prevent Bleed Through/Remove Background
Prevents the background or original image on the reverse side of 
thin originals from appearing in scanned images.

Text Enhancement Modes
The scanner is equipped with an Advanced Text Enhancement 
Mode to enhance the text of documents with dark or uneven 
backgrounds, and an Advanced Text Enhancement II mode to 
enhance the text when both the text and background are light.
These modes may not work, depending on the type of document.

Содержание imageFORMULA DR-M260
























































































Отзывы: