37
Configuring Scanner Settings According
to Purpose
Set the scanning conditions according to the scanning purpose.
When you want to delete the images of the blank pages in
two-sided documents
Set the scanning side setting to [Skip Blank Page] on the [Basic] tab
to delete the images of the blank pages in the document.
If [Skip Blank Page] is selected, the [Setting] button is enabled, and
you can adjust the level for judging whether pages are blank.
When you do not want to scan colored lines and text
Specify the color (red, green, blue, all colors) to be ignored (dropped
out) in the color drop-out settings on the [Image processing] tab, and
that color will be removed from the scanned image.
When you want to enhance a particular color
Specify the color (red, green, blue) to be enhanced in the color drop-
out settings on the [Image processing] tab, and that color will be
enhanced in the scanned image.
