23
Connecting using the AP Mode
To connect one-to-one with a wireless LAN-equipped computer, set
this scanner to the AP mode.
1
If the scanner is on, turn it off.
Press and hold the power button until the indicator goes out.
2
Turn on both the AP switch and the WIRELESS switch on the rear of
the scanner.
3
Turn on this scanner.
4
Enable the wireless LAN function of the computer.
This step is not necessary if the wireless LAN function is already enabled.
See "About the Computer's Wireless LAN Function" on p.21 for wireless LAN
function setting details.
(1) Click the
icon in the taskbar to display a list of available wireless
networks.
(2) Select the SSID from step 2 in the list, then click [Connect].
(3) Enter the security key from step 2 in the screen that appears, then
click [OK].