background image

6

INTRODUCTION

Thank you for purchasing the Canon Check Reader CR-50/80.
Please read this manual thoroughly before using the machine in order 
to familiarize yourself with its capabilities, and to make the most of its 
many functions. 

Manuals for the CR-50/80

The following manuals are provided with the CR-50/80. Be sure to read 
these manuals thoroughly before using the scanner. (The Installation 
Guide and the Operation & Maintenance Guide are extracted from the 
Instructions.) Electronic manual is stored as a PDF file on the supplied 
Setup Disc and requires Adobe Reader to open. (You can download 
Adobe Reader from the Adobe Web site.)

Installation Guide (Supplied with the scanner/Electronic Manual)

Describes the procedure for setting up the CR-50/80 for scanning. Set 
up the CR-50/80 in accordance with the Installation Guide. For details 
on the CR-50/80, refer to the 

Instructions

 (electronic manual).

Operation & Maintenance Guide (Supplied with the scanner/
Electronic Manual)

Describes the basic operations for using the CR-50/80, 
troubleshooting, and maintenance. For details on the settings of the 
CR-50/80, refer to the 

Instructions

 (electronic manual).

Instructions (Electronic Manual): This Manual

Describes how to use the scanner, and includes instructions for 
configuring the scanner settings, as well as handling, maintenance, 
and troubleshooting information.

Symbols Used in This Manual

The following symbols are used in this manual to explain procedures, 
restrictions, handling precautions, and instructions that should be 
observed for safety.

WARNING

Indicates a warning concerning operations that may lead to death or 
injury to persons if not performed correctly. To use the machine safely, 
always pay attention to these warnings.

CAUTION

Indicates a caution concerning operations that may lead to injury to 
persons, or damage to property if not performed correctly. To use the 
machine safely, always pay attention to these cautions.

IMPORTANT

Indicates operational requirements and restrictions. Be sure to read 
these items carefully to operate the machine correctly, and avoid 
damaging the machine.

NOTE

Indicates a clarification of an operation, or contains additional 
explanations for a procedure. Reading these notes is highly 
recommended.

Содержание imageFORMULA CR-80



























































Отзывы: