35
This section describes how to load and scan documents.
CAUTION
• Avoid wearing loose fitting clothing, dangling jewelry, long ties,
or long hair that could become entangled with moving parts,
especially the rollers that feed paper through the scanner. If such
objects become entangled, immediately disconnect the power
plug from the power outlet.
• Check the paper stack and remove all clips, staples, pins, or any
other type of metal or plastic fastener. These objects may cause
damage to the document, a paper jam, or a scanner malfunction.
• Do not touch anything except the operation buttons when
documents are being fed.
• Do not touch documents that are being fed under any
circumstances. The documents that are being fed may cut your
hand.
Scan Procedure
A
Open the Document Feed / Eject Tray.
B
Carefully align the edges of the document.
C
Loads the documents with their front sides facing right and
without exceeding the load capacity.
D
Adjust the Eject Stopper in accordance with the document.
E
Instruct scanning to start from the software application.
NOTE
•
When Using the Accompanying Scanning Utility for CR-120/CR-150:
There are three scanning methods as follows. Follow the each instruction.
Scan 1 page
Click [Scan Page] from the [File] menu.
Scan Batch to File
A
Click [Scan Batch to File] from the [File] menu.
B
Input the File name, and then click [Save].
C
Select Simplex or Duplex, and then click [Start Scanning].
Document Feeding and Scanning
