manualshive.com logo in svg

Canon imageCLASS X LBP1238, Руководство по обслуживанию

Поделиться
Скачать
Canon imageCLASS X LBP1238 Скачать руководство пользователя страница 71

12/09 2015 10:14AM
 

 

 

****************************

 

 

 

*** E-RDS-COM-LOG***

 

 

 

****************************

No.01 

DATE 

12/09 2015 

TIME 03:21 AM 

CODE 05000003

     Information    SUSPEND: Communication test is not performed.

No.02 

DATE 

12/09 2015 

TIME 03:21 AM 

CODE 00000000

     Information    SUSPEND: mode changed.

No.03 

DATE 

12/09 2015 

TIME 03:18 AM 

CODE 05000003

     Information    SUSPEND: Communication test is not performed.

No.04 

DATE 

12/09 2015 

TIME 03:18 AM 

CODE 00000000

     Information    SUSPEND: mode changed.

No.05 

DATE 

12/09 2015 

TIME 01:56 AM 

CODE 05000003

     Information    SUSPEND: Communication test is not performed.

Output sample

 Error Message List

Error information displayed on the communication error log detail screen is shown below.
(The "server" described here means Remote Monitoring Server.)

Code

Character strings

Cause

Remedy

0000
0000

SUSPEND: mode changed.

Operation mode mismatch

Execute initialization of the E-RDS settings
(ERDS-DAT).

0500
0003

SUSPEND: Communication test
is not performed.

E-RDS was enabled, but the main power of
the device was turned OFF and then ON
without performing a communication test.

Perform and complete a communication test
(COM-TEST).

0xxx 0003 Server schedule is not exist

The schedule does not exist.

Perform and complete a communication test
(COM-TEST).

0xxx 0003 Communication test is not per-

formed

Communication test has not been comple-
ted.

Perform and complete a communication test
(COM-TEST).

84xx 0003 E-RDS switch is setted OFF

E-RDS is not enabled.

Set the value of the E-RDS setting (E-RDS)
to 1, and perform a communication test
(COM-TEST).

8600
0002
8600
0003
8600
0101
8600
0201
8600
0305
8600
0306
8600
0401
8600
0403
8600
0414
8600
0415

Event Registration is Failed

Processing in the device (event processing)
failed.

Turn OFF and then ON the power of the de-
vice. If the error occurs again after turning
OFF and then ON the power, replace the
system software of the device (version up-
grade).

8700
0306

SRAM version unmatch!

An invalid value has been entered at the
beginning of the NVMEM area of E-RDS
(nonvolatile memory area).

Turn OFF and then ON the power of the de-
vice.

8700
0306

SRAM AeRDS version unmatch! An invalid value has been entered at the

beginning of the NVMEM area of E-RDS
(nonvolatile memory area).

Turn OFF and then ON the power of the de-
vice.

3. Technical Explanation (System)

61

Содержание imageCLASS X LBP1238





























































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды