Canon imageCLASS MP390 Скачать руководство пользователя страница 129 | Manualshive

Страница: 129 / 189

Canon imageCLASS MP390 Скачать руководство пользователя страница 129

Chapter 13

Maintenance

127

Checking the ink level

If you reset the ink counter when you installed/replaced the ink tanks, you can check the current
ink level of the ink tanks at any time.
To check the current ink level of the ink tanks, press [COPY], [FAX], [SCAN], or [PHOTO].
The LCD will display the ink level for approx. three seconds.

NOTE

• The LCD will not display the ink level when <

LOW INK WARNING

> is set to <

OFF

>. (See page 172.)

4

Use [ ] or [ ] to select <

2.INK COUNT RESET

>.

5

Press [OK].

• The LCD displays a message asking if you replaced the black ink tank.

NOTE

• Do not press any keys other than [ ] or [ ].

6

If you replaced the black ink tank, press [ ]. If you did not, press [ ].

• The LCD displays a message asking if you replaced the color ink tank.

7

If you replaced the color ink tank, press [ ]. If you did not, press [ ].

• The ink counter is now reset.

NOTE

• Press [Stop/Reset] to switch the machine to standby mode.

INK VOLUME

2.INK COUNT RESET

BLACK INK CHANGED?

- YES NO +

COLOR INK CHANGED?

- YES NO +

Ex:

COPY MODE

COL BLK

Indicates the remaining ink volume at three levels.

?

Indicates the ink counter was not reset after replacing the ink tanks.

«
...
127
128
129
130
131
...
»

Содержание imageCLASS MP390






























































































































































































Отзывы:

Нет отзывов