Canon imageCLASS MF8380Cdw Скачать руководство пользователя страница 14

Страница: 14 / 192

xiv

• Insert the power plug completely into the AC power outlet.

Failure to do so can result in a fire or electrical shock.

• If excessive stress is applied to the connection part of the

power cord, it may damage the power cord or the wires

inside the machine may disconnect. This could result in a

fire. Avoid the following situations:

- Connecting and disconnecting the power cord

frequently.

- Tripping over the power cord.
- The power cord is bent near the connection part, and

continuous stress is being applied to the power outlet or

the connection part.

- Applying a shock to the power connector.

• Do not use power cords other than the one provided, as

this can result in a fire or electrical shock.

• As a general rule, do not use extension cords. Using an

extension cord may result in a fire or electrical shock.

• Remove the power plug from the AC power outlet and

refrain from using the machine during a thunder storm.

Lightning can result in a fire, electrical shock or malfunction.

CAUTION

• Do not use a power supply voltage other than that listed

herein, as this may result in a fire or electrical shock.

• Always grasp the power plug when unplugging the power

plug. Do not pull on the power cord, as this may expose the

core wire of the power cord or damage the cord insulation,

causing electricity to leak, resulting in a fire or electrical

shock.

• Leave sufficient space around the power plug so that it can

be unplugged easily. If objects are placed around the power

plug, you may be unable to unplug it in an emergency.

Handling

WARNING

• Do not disassemble or modify the machine. There are

high-temperature and high-voltage components inside the

machine which may result in a fire or electrical shock.

• Electrical equipment can be hazardous if not used properly.

Do not allow children to touch the power cord, cables,

internal gears, or electrical parts.

• If the machine makes an unusual noise or emits smoke,

heat, or an unusual smell, immediately turn OFF the power

switches of the machine and computer and disconnect the

interface cable if it is connected. Then, unplug the power

plug from the AC power outlet and contact your local

authorized Canon dealer. Continued use can result in a fire

or electrical shock.

• Do not use flammable sprays near the machine. If

flammable substances come into contact with electrical

parts inside the machine, this may result in a fire or

electrical shock.

• Always turn OFF the power switches of the machine and

computer, and then unplug the power plug and interface

cables before moving the machine. Failure to do so can

damage the cables or cords, resulting in a fire or electrical

shock.

• Confirm that the power plug or power connector is inserted

completely after moving the machine. Failure to do so can

result in an overheating and fire.

• Do not drop paper clips, staples, or other metal objects

inside the machine. Also, do not spill water, liquids, or other

flammable substances (alcohol, benzene, paint thinner,

etc.) inside the machine. If these items come into contact

with a high-voltage area inside the machine, this may result

in a fire or electrical shock. If these items are dropped or

spilled inside the machine, immediately turn OFF the power

switches of the machine and computer and disconnect the

interface cable if it is connected. Then, unplug the power

plug from the AC power outlet and contact your local

authorized Canon dealer.

• When plugging or unplugging a USB cable when the power

plug is plugged into an AC power outlet, do not touch the

metal part of the connector, as this can result in electrical

shock.

CAUTION

• Do not place heavy objects on the machine. The object or

the machine may fall, resulting in personal injury.

• Turn OFF the power switch when the machine will not be

used for a long period of time, such as overnight. Turn OFF

the machine and unplug the power plug if the machine

will not be used for an extended period of time, such as for

several days.

• Open or close covers and install or remove cassettes gently

and carefully. Be careful not to hurt your fingers.

• Keep your hands and clothing away from the roller in the

output area. Even if the machine is not printing, the roller

may suddenly rotate and catch your hands or clothing,

resulting in personal injury.

• The output slot is hot during and immediately after

printing. Do not touch the area surrounding the output slot,

as this may result in burns.

• Printed paper may be hot immediately after being output.

Be careful when removing the paper and aligning the

removed paper, especially after continuous printing. Failure

to do so may result in burns.

• When performing copy with a thick book placed on the

platen glass, do not press the feeder or the platen glass

cover forcefully. This may damage the platen glass and

cause personal injury.

• Be careful not to drop a heavy object, such as a dictionary,

on the platen glass. This may damage the platen glass and

cause personal injury.

• Close the feeder or the platen glass cover gently so as not

to catch your hand. This may result in personal injury.

• The laser beam can be harmful to the human body. The

laser beam is confined in the laser scanner unit by a cover,

so there is no danger of the laser beam escaping during

normal machine operation. Read the following remarks and

instructions for safety.

- Never open covers other than those indicated in this

manual.

- Do not remove the caution label attached to the cover of

the laser scanner unit.

- If the laser beam should escape and enter your eyes,

exposure may cause damage to your eyes.

Содержание imageCLASS MF8380Cdw

































































































































































































Результаты поиска

Содержание imageCLASS MF8380Cdw

Отзывы:

Похожие инструкции для imageCLASS MF8380Cdw

Бренды по названию

Популярные бренды

Canon imageCLASS MF8380Cdw, Основное руководство по эксплуатации

Результаты поиска

Содержание imageCLASS MF8380Cdw

Отзывы:

Похожие инструкции для imageCLASS MF8380Cdw

Бренды по названию

Популярные бренды