Canon IMAGECLASS MF7400, Основное руководство по эксплуатации, Страница: 244 / 388

5‑11
Receiving Documents
Available Paper Sizes
When received documents are printed, they are printed from the paper drawer that
has the same size paper as the received document. If all of the settings in Select
Cassette in RX Settings under <Common Settings> in Communications Settings are
set to [On], and paper of the correct size is not available, the machine automatically
selects a different paper size in the following order. The paper size is automatically
selected in the same order, even if paper runs out during printing.
Available Paper Sizes for Received Documents
11" x 17" originals
11" x 17"
→
LGL*
→
LTR*
→
STMT x 2
LGL originals LGL → LTR* → 11" x 17" → STMT x 3
LTR originals LTR → LGL → 11" x 17" → STMT x 2
STMT originals STMT
→
LTR
→
LGL
→
11" x 17"
Received documents are automatically reduced or separated before being printed on the
paper size indicated.
The order of paper selection may differ depending on the resolution set on the sending party’s machine.
Received documents can be printed on the following paper sizes and paper types:
Paper Sizes: 11" x 17", LGL, LTR, LTRR, or STMTR
Paper Types: plain or recycled
You can specify any paper drawer to receive fax/I‑fax documents. The default setting is [On], except for the
stack bypass.
You can set the machine to reduce received documents by 75%, 90%, 95%, or 97% if the document is larger
than any of the available paper sizes. (See Chapter 4, “Sending and Receiving,” in the Reference Guide.)
You can change the order of paper selection. (See Chapter 4, “Sending and Receiving,” in the Reference
Guide.)
You can set the machine to print received documents on both sides of the paper. (See Chapter 4, “Sending
and Receiving,” in the Reference Guide.)
Received documents are output face down, in the order in which the pages are received.
*
–
–
–
–
–
–
–
–
–