manualshive.com logo in svg

Canon IMAGECLASS MF7400, Основное руководство по эксплуатации, Страница: 223 / 388

Поделиться
Скачать
Canon IMAGECLASS MF7400 Скачать руководство пользователя страница 223

Sending Documents

4‑88

Erasing a Favorites Button

●

1

 

Press   (Additional Functions).

2

 

3

 

4

 

If the desired setting is not displayed, press 
[

▼

] or [

▲

] to scroll to the desired setting.

5

 

①

 Select a Favorites Button with the send 

settings that you want to erase.

②

 Press [Erase].

A screen appears, asking for your 
confirmation to erase the settings.

If the desired Favorites Button is not 
displayed, press [

▼

] or [

▲

] to scroll to the 

desired Favorites Button.
Make sure to check the settings first before 
erasing them.
Keys that already have settings stored in 
them are displayed with a black square (

■

) 

in the lower right corner of the key.

6

 

To cancel erasing the settings, press [No].
The message <Erased.> appears for 
approximately two seconds on the touch 
panel display.

–

–

–

①

②

Содержание IMAGECLASS MF7400





































































































































































































































































































































































































Отзывы:

Нет отзывов