Canon IMAGECLASS MF7400 Скачать руководство пользователя страница 184

Страница: 184 / 388

4‑49

Sending Documents

Checking/Changing a Destination

You can check and change a specified destination before you scan your documents.

Only the destination specified using the New Address tab can be changed.

①

Select the destination.

②

Press [Details].

If only one destination is specified, just
press [Details].
If the destination that you want to check or
change is not displayed, press [

▼

] or [

▲

]

to scroll to the desired destination.

Check or change the destination’s
information.

If the destination has been
specified using any method
other than New Address tab:

①

Check the destination’s information.

②

Press [Done].

–

●

①

②

①

②

①

②

①

②

If the destination has been
specified using one of the
sending methods in the New
Address tab:

①

Check or change the destination’s

information.
Change the destination’s information
in the same way that you specified it.
(See “Using the New Address Tab,” on
p. 4‑32.)

②

Press [OK].

If the destination is a group
address:

①

Select one destination at a time.

②

Press [Details].

●

①

②

①

②

①

②

①

②

Содержание IMAGECLASS MF7400





































































































































































































































































































































































































Результаты поиска

Содержание IMAGECLASS MF7400

Отзывы:

Canon IMAGECLASS MF7400, Основное руководство по эксплуатации, Страница: 184 / 388

Результаты поиска

Содержание IMAGECLASS MF7400

Отзывы: