manualshive.com logo in svg

Canon imageCLASS MF4890dw, Руководство по обслуживанию, Страница: 351 / 511

Поделиться
Скачать
Canon imageCLASS MF4890dw Скачать руководство пользователя страница 351

4

4

4-275

4-275

Disassembly/Assembly > Laser Exposure System > Removing the Laser Scanner Unit (MF4780w/MF4770n/MF4750/MF4730) > Procedure

Disassembly/Assembly > Laser Exposure System > Removing the Laser Scanner Unit (MF4780w/MF4770n/MF4750/MF4730) > Procedure

Removing the Laser Scanner Unit (MF4780w/
MF4770n/MF4750/MF4730)

 

■

Preparation

1)Remove the left cover.
2)Remove the SADF unit and reader unit.
3)Remove the right cover.
4)Remove the front cover unit.
5)Remove the upper cover

 

■

Procedure

Caution:

Do not disassemble the laser scanner unit because adjustment is required.

1) Remove the scanner cover [1].
•  2 screws (black TP) [2]

[1]

x2

[2]

F-4-740

Caution:

•  When mounting the scanner cover, pass the shutter open/close lever [1] through the 

hole [A] in the scanner cover.

[1]

[A]

•  Ensure that the shutter open/close lever [1] can move vertically.

 

[1]

F-4-741

F-4-742

Содержание imageCLASS MF4890dw
































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов