manualshive.com logo in svg

Canon imageCLASS MF264dw, Руководство пользователя, Страница: 653 / 700

Поделиться
Скачать
Canon imageCLASS MF264dw Скачать руководство пользователя страница 653

●

When sending an original with many pages, divide the original and send it.

●

Change the set resolution to a lower resolution when scanning the original.

[Home] screen on the control panel   [Fax]   [Resolution]   select the resolution.

  Cannot Receive a Fax

Ask the sender to divide the original or lower the resolution and send the fax again.

#005

There was no response from the other party's device within the time limit.

Did You Specify an Overseas Destination?

You may not have been able to connect correctly to the destination. After entering the international access

number or country code, enter the wait time (pause) or lower the communication start speed before sending

the fax.  Cannot Send a Fax to an International Destination(P. 620) 

Is the Other Party's Device Ready to Receive a Fax?

The power of the other party's device may not be turned on, or the RX Mode may not be configured correctly.

Have the other party check these.

#012

The receiving device is out of paper (recording paper).

Have the other party add more paper.

#018

There was no response from the other party's device due to it being busy or another reason.

Did You Specify an Overseas Destination?

You may not have been able to connect correctly to the destination. After entering the international access

number or country code, enter the wait time (pause) or lower the communication start speed before sending

the fax.  Cannot Send a Fax to an International Destination(P. 620) 

Is the Other Party's Device Ready to Receive a Fax?

The power of the other party's device may not be turned on, or the RX Mode may not be configured correctly.

Have the other party check these.

#022

Sending of faxes from a computer is restricted. Alternatively, the destination specified as the forwarding destination

may have been deleted from the Address Book.

To Cancel Restriction of Sending Faxes from a Computer, Change the [Fax TX Settings] Setting.

Log in to Remote UI in System Manager Mode   [Settings/Registration]   [TX Settings]   [Fax TX Settings] 
[Edit]   select the [Allow Fax Driver TX] checkbox   [OK]

On the control panel, select [Menu] in the [Home] screen, and then select [Function Settings] to change the

setting.  [Allow Fax Driver TX](P. 496) 

Register the Forwarding Destination to the Address Book.

Registering Destinations to the Address Book (Remote UI)(P. 176) 

Check Whether the Fax That Could Not Be Forwarded Is Saved in the Memory.

If the fax is saved in the memory, you can try forwarding it again.  Checking Faxes that Failed to Be

Forwarded(P. 294) 

Troubleshooting

644

Содержание imageCLASS MF264dw





























































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов