Canon IMAGECLASS MF247dw, Руководство пользователя, Страница: 152 / 714

When selecting <Fax/Tel (Auto Switch)>
Specify the following three settings as necessary. When the setting is complete, tap <Apply>.
<Ring Start Time>
Enables you to specify the duration during which the machine determines whether an incoming call is a fax
or a telephone call. (Setting values: 4 to 30 seconds; default setting: 6 seconds)
<Incoming Ring Time>
Enables you to specify the duration during which an incoming call rings for a telephone call. (Setting values:
15 to 300 seconds; default setting: 15 seconds)
<After Ring>
Enables you to specify how the machine operates if you do not pick up the handset while an incoming call is
ringing. Select <End> to disconnect the call or <Receive> to receive an incoming fax. (Default setting:
<Receive>)
When selecting <DRPD: Select Fax>
Select the ring pattern that your telephone company assigned to your fax number.
● If you want to print received documents on both sides of paper: Print on Both Sides(P. 505)
● If you want to print information, such as reception date and time, at the bottom of received documents:
RX Page Footer (P. 506)
● If you want to continue printing even when the toner cartridge is low: Continue Print. When Near Cart.
Life End (P. 507)
◼
Using a Telephone to Receive Faxes (Remote Reception)
When you pick up the telephone and get a fax signal, you do not need to go to the machine to receive the fax. Just
enter a specific ID number (default setting: 25) with the telephone, and you can start receiving the fax.
When the telephone is not directly connected with the machine, the remote reception function is not available.
Faxing
144