Canon imageCLASS LBP913w, Руководство пользователя

Страница: 118 / 327

Specifying the value for time until auto termination
● You can specify the time to automatically establish a disconnection when the direct connection is enabled.
<Time Until Direct Connection Termination>(P. 177)
Connecting multiple mobile devices at the same time
● Configure the machine's SSID and network key arbitrarily. The network key can be left blank. <Access
Point Mode Settings>(P. 178)
Connecting Directly
● It may take time until a connection of the machine and the mobile device is established.
1
Select <Menu> in the Home screen. Home Screen(P. 80)
● When any mobile device is already connected, press , and proceed to step 3.
2
Select <Direct Connection>.
● If a message appears, continue by following the instructions on the screen.
3
Select <Display SSID/Network Key>.
4
Configure the Wi-Fi settings from the mobile device using the SSID and network key
information that appear on the display.
5
When the target operation is completed, press , then select <Disconnect> <Yes>.
● Select <Connection Information> on the screen under the direct connection to check the connected mobile
device.
● While connecting via direct connection, you may not be able to connect to the Internet depending on the
mobile device you are using.
● If a wireless connection from the mobile device is not performed within 5 minutes while the SSID and
network key are displayed, the connection waiting state terminates.
● If the status without data transmission between the mobile device and the machine continues during
communication by direct connection, the communication may end.
Linking with Mobile Devices
113